1. When cutting down, we use a ventilated machine to cut the paper, and the height of the cutting paper cannot exceed 125mm, and according to the needs, use a mei-position weight to fasten it. The paper tube machine can only cut paper, never cut other materials. When working, do not reach under the pressing iron and blade to prevent cuts. Use a dedicated paper cutter, do not reach into the rotating mandrel to prevent injury.
2. When edging, we should always pay attention to the trousers being rolled into the paper loading shaft to prevent injury or damage to the machine
3. When adjusting the machine tool, pay attention to the abrasive cloth wheel to prevent injury
Secondly, the paper tube machine should be maintained in addition to the relevant precautions during operation.
1. The equipment must be the responsibility of a special person, and others are prohibited from moving
2. The person in charge should check whether there are workers, cards, measuring tools and other sundries placed in various parts of the machine at any time, and remove them in time if they are found;
3. Staff are not allowed to leave their jobs at will to ensure the safe and normal operation of the machine. If they need to leave, they must ask someone (the same type of staff) to take care of them;
4. Ensure the stability of the working voltage and do not let the click burn out
5. Regularly check all the internal parts, observe the consumption level, and replace all the parts with serious wear. Reassembly should be measured with a spirit level, and the unevenness of the pump should be adjusted, and the coaxiality of the coupling should be checked and adjusted.
In any case, we just need to pay attention to the use method during normal work to prevent the machine from being released due to improper operation; and maintain small maintenance in a short period of time during maintenance, take maintenance for a long time, and use the paper tube machine to maintain a good condition. working status.
