In the process of practical application, the cutting objects to be faced by the paper cutter are various, in addition to paper and cardboard, there are leather, plastic, cork floor and PS version, etc.
Due to the variety of materials to be cut, different paper press pressures should be used for different materials, and the angle of the cutting edge should also be changed to ensure high-quality cutting products.
The choice of the cutting edge angle is a very important part of the cutting work. In other words, a good paper cutter should be equipped with a good paper cutter and sharpening process. But we found in the after-sales service of the paper cutter that many paper cutter users often neglect this point. As a result, often due to the wrong way, method and angle of the cutting blade sharpening, the impact force during cutting increases, causing the safety screw to loosen or even break, and eventually cause mechanical damage.
The range of materials that need to be cut by the paper cutter is getting wider and wider, such as beer aluminum foil cap label, carbonless copy paper, honeycomb cardboard, magnetic card, photosensitive film, etc. These materials will encounter different practical problems in the cutting process. For example, carbonless copy paper is prone to indentation when cutting, while magnetic cards,
When the photosensitive film is cut, the paper press will not be fixed, resulting in cutting waste and so on. These problems can be handled smoothly by adjusting the pressure of the paper press, improving the blade and cutting drive system. However, as far as the author understands these technologies, only some paper cutter manufacturers in China can handle them all.
