When preparing to operate the paper straw machine, the operator should firstly wear the protective equipment that needs to be worn in a regular manner. It is necessary to wrap the hair in the working protective cap, otherwise some operators with too long hair are operating the paper straw machine. It is possible that the hair is too long and is twisted into the paper straw machine, and the consequences are very risky. Of course, in addition to wearing regular protective work, some equipments are forbidden to be worn when using the paper straw machine. No operator can wear gloves when operating the paper straw machine. The gloved hand was twisted into the rotating part of the paper straw machine, resulting in a human injury.
After the operator wears it properly, first check the paper straw machine for safety, first run it empty, check whether the paper straw machine can operate normally, and then check whether the items that need to be fastened in the paper straw machine have been installed firmly. Looseness, including the tools that need to be used and the parts that need to be processed, can only work normally under normal conditions. If something goes wrong, the paper straw machine cannot be forced to start for the sake of working power. It is extremely prone to accidents and the consequences are unimaginable. . There is a mechanical safety device on each paper straw machine. When the operator admits to starting the paper straw machine, the operator must confirm that the mechanical safety device is normal and can be used normally before starting the paper straw machine. Operators are prohibited from operating for convenience. Remove the mechanical safety equipment, or do not activate the mechanical safety equipment when operating the paper straw machine.
After the operator starts the paper straw machine and the paper straw machine is put into work, it is necessary for the operator to observe the work of the paper straw machine. Disposal, of course, during the operation of the paper straw machine, when something goes wrong, the operator cannot directly adjust it by hand, or add lubricating oil to the paper straw machine and sort out the sundries and other operations. Instead, the paper straw machine should be used first. Close to adjust the paper straw machine.
Until the work of the whole paper straw machine is completed, the operator needs to close the paper straw machine, then remove all the processed items and tools from the paper straw machine, and place the tools and other parts in the box and arrange them neatly. In the finishing work of the paper straw machine and the cleaning of the surrounding environment of the paper straw machine.
