The laminating machine has the advantages of small footprint, simple operation and fast speed. Feed table adopts conveyor belt, discharge adopts power roller,
Can withstand heavy large plates are widely used in stainless steel plate, aluminum plate, aluminum-plastic plate, UV paint board, iron plate, decorative cabinet door,
Paint board, paint panel, acrylic board, color steel plate, fire board, Plexiglass board, cabinet door laminator, signage, high-end furniture board,
Color coated board, electrical PVC and other flat film, paste, press with plastic PE protective film, electrical cabinet, decorative film, etc., in order to facilitate production and processing,
No contamination, corrosion, power transmission and scratches during transportation, storage and use, protect the original smooth and shiny surface and anti-burst lenses.
This series of laminating machine is composed of upper and lower roller, frame, power transmission and control device, film support frame, etc. It has the characteristics of flat laminating film, no wrinkles, no bubbles, simple operation, long service life and so on.
1, automatic paper feeding Feida adopts oil-free vacuum air pump suction paper automatic feeding.
2, the automatic paper feeding system is equipped with photoelectric control of paper shortage, paper break automatic stop protection device.
3, human-machine interface system, color touch screen, simple and convenient, direct input, to achieve full set operation automation. The operator can check the working status of the machine at any time from the touch screen.
4, the built-in oil heating method has excellent constant temperature performance, and ensure uniform and stable film temperature.
5, the automatic air pressure system can provide a stable film pressure, the pressure can be adjusted according to needs.
6, gas release film shaft, film roll loading and unloading is more convenient, release film positioning is accurate.
7, the release film shaft is equipped with clutch tension control system to control the release film tension and release film speed.
8, the film slitting knife can cut the film width, so that it is suitable for the paper width.
9, the film punching knife can punch holes at the edge of the film to smoothly achieve automatic cutting.
10, anti-bending device, the paper behind the peritoneum is shaped by the anti-bending device, and the paper is no longer bent after cutting.
11, pneumatic slitting system can automatically slitting laminated paper.
12, the paper after cutting is automatically received and sorted by the vibrating paper receiving table.
For more information about the laminating machine, please refer to the preparation of the laminating machine before starting. Automatic single-side hot laminating machine operation saving film can greatly save costs,
This is also the most basic operation specification of the laminating machine, and the following suggestions are made on how to save film:
When laminating, attention should also be paid to the texture direction of the film, especially the thick film, to reduce the phenomenon of curling caused by rolling and stretching of the film.
Laminating machine should pay attention to control the speed, according to actual experience and material changes to control the speed, as far as possible to maintain a uniform speed;
The film material must be flat and straight. Uneven films with "flanged edges" and "tight edges" should be treated.
The "flanged" film can be baked and the "tight" paper can be hung.
The temperature is generally controlled to 40 ~ 60℃. Too high a temperature will deform the film, causing the product to curl, but not too low, otherwise it will cause insufficient viscosity.
According to the different coating materials, the temperature can be controlled according to their actual experience, so as to save the amount of film to the greatest extent.
