As the name suggests, the binding machine is used to bind the text, for example: the company wants to do training materials, bidding tenders, product brochures, desk calendars, examination papers, statements and so on.
The first part, basic knowledge
Binding machine product type: refers to the binding method used by the binding machine, which can be divided into two kinds of punching binding machine and hot melt binding machine, and now the market is popular with hot melt binding machine, comb rubber binding machine, iron binding machine.
(1) Hole binding (you can change the inner pages of the binding data at will) : This binding method is to punch holes regularly on one side of the spine of the document, and then fix the document together with the help of consumables. Divided into 21 holes of rubber binding, 34 holes of iron binding, 46 holes of single coil binding machine.
1, 21-hole binding: that is, the number of holes punched each time is 21 holes (A4 size), also known as comb rubber binding, rubber binding machine is 21 holes. There are two kinds of consumables used in the 21-hole binding machine: 21-hole rubber ring and 21-hole hard clip. The former binding method is to pull the rubber ring with the help of the machine, put the perforated document into the rubber ring and close the rubber ring to complete a binding process. The latter is to put the perforated document directly into the hard clip and close the clip to complete the binding process.
Rubber binding machine punching methods are electric and manual. The manual binding machine can be divided into double handle and single handle. In the process of using the double-handle rubber ring machine, the long handle is used to punch holes, and the short handle is used to pull the ring. Single-handle rubber ring machine in the process of use, the handle is pulled down to punch, and the handle is pulled up to pull the ring. The electric binding machine is electrically punched and manually drawn.
The binding thickness of the binding machine is usually 400 to 500 pages (40mm-50mm). Its punching method has two kinds of drawing knife and no drawing knife, drawing knife refers to the uniform drawing knife can also be irregular drawing knife, according to the needs of binding arbitrarily adjust the number and spacing of punching; No drawing knife refers to the 21 space fixed dead, can not change the way of punching.
2, 34 hole binding machine: that is, the number of holes punched each time is 34 holes, also known as iron binding. The consumables used for the 34-hole binding machine are iron rings. The international specifications of the iron ring machine are 3:1 and 2:1.
3:1 means 3 holes in 1 foot, 2:1 means 2 holes in 1 foot. The binding thickness of 3:1 is 130 pages, and the specifications of the iron rings used are 6mm-14mm. The 2:1 binding thickness is 250 pages, and the specifications of the iron rings used are 16mm-34mm. The number of holes punched by the ring machine is 34 teeth of 3:1 and 23 teeth of 2:1.
3, 46 hole binding machine: refers to the single coil binding machine, that is, the number of holes punched at a time is 46 holes. This binding machine is in the document after 46 round holes, by a spiral shape of rubber ring or iron ring to bind the document, for calendar and notebook manufacturers used.
4. Strip binding machine: The text is installed on the plastic strip manually after punching the hole first, and then fastened. The form is usually bound with 10 holes
Second, non-hole binding (not free to change the inner pages of the binding data) : can be roughly divided into hot melt binding and spine binding.
1, hot melt binding: the working method is to put the finished documents into the special cover and then put the spine side down into the machine, the machine will produce heat to cover the spine of the hot melt glue melted into the spine side of the document, after the temperature drops, the hot melt glue is restored to solid and the document tightly bonded together with the cover.
2, spine binding: the working method is roughly the same as hot melt binding, is to use a special hot melt spine seal to wrap the spine side of the document, and then use the heat generated by the machine to melt the hot melt of the spine seal to achieve the role of bonding documents.
The second part, procurement guide
As a user, when buying equipment, it will not only take into account the price of the whole machine, but also take into account the price of related consumables and which way is most suitable for their work. For the binding machine, the user is most concerned about the binding thickness, punching thickness and the price of consumables, the following can be combined with our products to do an analysis.
First, the advantages and disadvantages of various binding methods of hole binding machine:
Rubber binding machine advantages:
1. The consumables are cheap and can be reused;
2.. Binding thickness up to 500 pages.
Rubber binding machine disadvantages:
1. The part of the rubber ring in contact with the document is very thin, long-term browsing will cause damage to the document or even drop the page;
2. Because the outside of the rubber ring is round, it is not easy to put;
3. Documents with thick binding need to be punched repeatedly, which takes a long time and is not easy to add pages;
4. It is not suitable for confidential documents, because missing pages are more difficult to be found;
5. The binding method is not novel, and the bound documents are not grade enough.
2, the advantages and disadvantages of the iron binding machine:
Advantages: Iron binding machine is generally divided into 2:1 (23 holes) and 3:1 (34 holes) two kinds. Among them, the binding effect of 3:1 iron binding machine is more exquisite, suitable for binding thin texts, suitable for general design institutes, planning bureaus or small and medium-sized printing centers; The 2:1 type is suitable for thicker binding.
Disadvantages: 1.34 hole binding machine consumables can not be reused;
2. The binding thickness is not large enough, no more than 14mm, if the user needs to bind the thickness of the document more than 140 pages, you can not use 34-hole binding machine;
3. The outside of the iron ring is round, which will not be easy to put;
4. It does not apply to confidential documents, again because missing pages are harder to find.
3, 46 hole binding advantages and disadvantages:
Advantages: 1. Binding beautiful, clean;
2. The dependence on the machine is small, and other work can be completed manually after the machine punching.
Disadvantages: The maximum binding thickness is only 13mm, so it is not possible to bind thick documents.
Two: The advantages and disadvantages of porous binding and non-porous binding.
Compared to perforated binding, non-perforated binding has a wide range of advantages:
1. Can not be affected by the thickness of the document, in the range of hundreds of pages can be arbitrarily bound;
2. And the time is longer, no matter how thick the document can be completed in a few minutes;
3. Add or subtract pages to the document at will with the help of the machine;
4. The appearance of the bound documents is noble and generous, which fully reflects the differences of the documents, and improves the grade of the documents as a whole.
Third, the comparison and customer choice of rubber binding machine, iron binding machine and hot melt binding machine.
1, comb rubber binding machine: it is one of the lowest cost of all binding machines, simple, easy to disassemble, and can be reused for multiple times. More suitable for small office or general meeting document binding, as well as small press. A binding machine has two binding methods, which is also a major feature of it. Comb binding machine for loose-leaf, adding and deleting pages is convenient, can achieve 360-degree flip of the text, the size of the diameter of the rubber ring, determines the thickness of the text binding, this binding method due to the size of the rubber ring, color and the color of the cover choice is larger, so the effect is also varied, unique style, beautiful and generous.
2, iron binding machine: generally divided into 2:1 (23 holes) and 3:1 (34 holes) two kinds, with 3:1 iron binding machine binding effect is more exquisite, suitable for binding thin text, suitable for general design institute, planning bureau or small and medium-sized printing center; The 2:1 type is suitable for thicker binding.
3, hot melt binding machine: with simple operation, fast speed, low cost of consumables, beautiful style and other advantages, belongs to the non-detachable type, suitable for small and medium-sized printing center, small and medium-sized office document binding, as well as accounting firms, audit firms and other units. When using the hot melt binding machine, be sure to tidy the documents before putting them into the envelope, otherwise the binding documents will be uneven; After the envelope is heated, it is necessary to sort out and fix the hot glue slightly by hand, so that the bound text is neat and tangible; Do not immediately turn the text after heating, easy to cause loose pages, after the rubber strip cooling solidification can turn.
