The cross-cutting machine can be used for the cutting of coated paper, coated paper, kraft paper and other paper and paper-plastic composite, plastic sheet and other roll materials, especially for the production of paper industry and paper processing industry. Then, when using the cross-cutting machine, it is necessary to carry out regular maintenance, so as to ensure the smooth operation of the machine and the cutting quality of the product.
First of all, the cross-cutting machine should be installed in a dry, ventilated, well-lit place that is easy to operate. Secondly, after each operation, it is necessary to clean up the dust and paper scraps on the machine in time, check the tool and the grinding wheel, check whether there is any abnormality in the running part, and add lubricating oil reasonably. Arrange the water in the oil-moisture high device and the gas storage tank side by side. Finally, cut off the power supply of the cross-cutting machine according to the operation requirements of the manual, and maintain the computer operating system.
The above is the basic daily maintenance work of the cross-cutting machine. The general principle is that the inspection, cleaning, and lubrication maintenance work is in place to ensure that all parts of the equipment are in good condition. In addition, it is also very important to improve the technical quality and level of operators. Special personnel should be responsible for the operation of the control part, and no one should operate it without permission.
