What Are The Problems Of The Semi -automatic Paper Cutting Machine?

In the process of practical application, the tailoring objects to be faced with paper machines are diverse. In addition to paper and cardboard, there are leather, plastic, cork flooring and PS version.
Due to the large variety of data to be cut, different materials should be used for different materials, and different paper pressure device pressures should be used. The angle of cutting blade mouth should also change to ensure that high -quality cut products are obtained.
The choice of cutting blade mouth is a very important part of the cutting work. In other words, a good paper cutting machine must be equipped with good paper cutting blade and blade grinding technology. However, we found in the after -sales service of the paper cutting machine that many paper -cutting machine users often neglected this. As a result, due to the method, method, and angle of the blade of paper cutting blade , Caused the insurance screws to loosen and even break, and eventually formed mechanical damage.
The scope of the data cutting machine is increasingly wider, such as beer and aluminum foil hats, carbon -free rehabilitation paper, honeycomb cardboard, magnetic card, photosensitive film, etc. These materials will encounter different practical problems during the cutting process. If the carbon -free re -writing paper is easy to show a indentation when cutting, and the magnetic card and the sensor film will show that the papermaker cannot be fixed during the cutting, causing the tailoring of waste products. These problems can be adjusted by adjusting the pressure of the paper pressure, and the cutting blade and cutting transmission system can be smoothly treated.