Generally speaking, the continuous cutting of the cross-cutting machine is nothing more than two situations, one is the problem of the cutter, and the other is the problem of power. As for the problem of the cutter, it can actually be subdivided into three questions: whether the cutter is sharp or not, whether the angle of the cutter is correct or not, and whether the cutter is normally lowered.
1. If the cutter of the cross-cutting machine is not sharp, then the cutting must not be carried out normally, and it is foreseeable that the cutting will continue.
2. Incorrect angle of the cutter will also make some materials appear continuously, and the problem of whether the cutter is normally cut down is whether the internal lubrication is sufficient.
3. As for the power problem, it is relatively simple, that is, whether the power transmitted by the motor is enough to support the cutter to cut the product smoothly.
