Paper straw machine, as far as the name is concerned, the machine and equipment for producing paper tubes, the paper tubes produced by it can be used in all walks of life, and the paper reeling machine generally has automatic paper cutting and paper cutting. The general function of the paper straw machine is very simple. I believe that customers who can understand Chinese can generally understand the meaning of the buttons on the digital panel or remote control. In short, you will not understand the meaning if you need it. It's good, after all, it's not particularly esoteric.
1. Matters needing attention before use
1. Personal protective equipment must be properly worn at work. There are also some things that should not be worn, not one of them, because sometimes accidents happen because of these things. For example, gloves are not allowed to be worn during work. If they are worn, the rotating part of the paper tube machine will easily twist the gloves in. Wound hands.
2. Before working, it is necessary to ensure that only the normal operation of the machine is carried out, and then the manual operation can be performed. The steps to ensure the normal operation of the paper tube machine are as follows. First, carry out various inspections, and then run empty for a period of time. The operation is stable and no abnormality. use.
3. If the mechanical equipment is found to be abnormal or faulty, it must be stopped immediately, otherwise it will easily lead to accidents.
4. The tools used by the paper tube machine are very sharp. Before working, make sure that the fixtures and the parts to be processed are installed firmly, and there should be no looseness.
5. When the paper tube machinery and equipment are running, the operator cannot leave the work position, and need to watch the equipment, because if there is a problem, no one will make timely adjustment.
Second, the problems that need to be paid attention to when using
1. The equipment has a certain risk to the operator, and do not approach the dangerous area without special circumstances.
2. The slitting knife is a very sharp tool, and all actions such as adjusting the position of the cutting knife need to be completely disconnected from the power supply of the equipment before it can be carried out.
3. The shield of the cutter cannot be opened during the operation of the equipment.
4. If a hole is found in the paper connection, when repairing it, it is necessary to stop the operation of the machine first, and then repair it.
5. The paper tube machine needs to have solid grounding protection.
6. It needs to be repaired by a professional electrician. Do not attempt repair work without authorization.
3. The method of maintenance before the motor runs
1. Use cleaning agent to wash away the stolen goods from all parts of the machine
2. Apply lubricating oil to each drip point
3. Check whether the gearbox and reducer are filled with oil or whether the oil level is normal
4. Before starting the equipment, you must carefully understand the structure, operation and lubrication instructions of the equipment.
5. After confirming that the power supply is connected correctly, the power indicator light should be on after the power is turned on.
6. Turn on the power switch (with key)
7. Press the low-speed button switch to make the equipment run at low speed.
8. Check the operation of the equipment. Only when the equipment runs smoothly, with sufficient lubrication and no abnormal noise, can it run at high speed.
4. General maintenance methods that can be operated independently
1. Clean up internal dust
1. Before and after the daily operation, the staff can observe the operation status of the equipment and the integrity of the safety protection devices of the accessories, and whether the lines and pipes are damaged.
2. Fill and change oil in time to keep the equipment running flexibly and smoothly, and wipe all parts of the equipment frequently.
3. It is stipulated that the screws should be stabilized and reinforced every time.
4. Maintenance work is best done every day.
Second, the specified time for mechanical lubrication
The paper tube machine should do daily maintenance and lubrication during work, and the lubrication part should follow the oil filling part of the equipment. The gear oil in the reducer and gearbox is generally replaced once every 5000 hours of operation.
Five, some troubleshooting methods
1. The length of the paper tube cannot be aligned
The solution is as follows:
Please adjust the infrared sensitivity for cutting at a distance of 200mm.
To shorten the deceleration time
Adjusted to reduce medium speed
Check that the distance between the cutter and the paper tube is about 15-20mm
Check for good grounding
2. Excessive movement of the paper tape during cutting causes deviation
The solution is as follows:
Check whether the direction of the cutter is opposite, if not, adjust it to the same.
Check whether the die head is too large, the die head is generally 0.5-0.8mm smaller than the inner diameter of the paper tube
Check for loose belt, replace belt or tighten
Three, cutting out of control
The solution is as follows:
Analyze whether the infrared sensitivity is set too high, and if so, please adjust an appropriate distance.
Check the ground wire for poor contact, tighten the contact point of the ground wire, and observe.
Fourth, the motor can not start or stop suddenly
The solution is as follows:
Open the English code displayed on the display, check the meaning of the code, and solve the problem
Turn off the power for about 2 minutes, then turn the power on again
